Hydr jackplate CMC PL65

[silver]

Worked perfectely ,now wont move up or down ,it gets power I can hear the relays click when pushing the toggle switch up or down is there anyone that can help

[smurf]

I had this same problem.But it can be an easy fix or it might not.The easy fix was the bolts on the side were a little tight and caused one side to grip a little when sliding up or down.I also had to remove the electric jacking motor and inspect the brushes on the armature.One carbon brush was not being pushed down onto the commutator and therefore not making contact,even though the power was coming to the motor.Took out the brushes,gave them a very light sanding to give better clearance in the brush holder,reconnected and perfect.Make sure you seal the motor well when you assemble.

[silver]

Thnky Smurf for that quick reply ,the side bolts I cheq and also spray some lube for smooth travel Im going to make work to look at the brushes , will let you know what is the outcome

[silver]

Well I thought it will be simple , looks like the relays are done,know I wonder how to get hold of those ,can I get them somewhere, probably cost a arm and leg

[smurf]

Relays for this are available from an auto parts place,like Midas.Just unplug and take the sample.